Skip to content
Pro Fix — home

Electrical

Residential Electrician in Fresno & Clovis, CA

Pro Fix is your local residential electrician in Fresno and Clovis, CA. We handle home wiring, panel upgrades, outlets, lighting, and Level 2 EV chargers, all done by a licensed and insured team. One call reaches us any hour, and every job is code-compliant. Request a free quote or call (559) 470-7000.

  • Licensed & insured
  • Available 24/7
Open electrical panel during a breaker inspection

On the job

What this work looks like

Representative photos of the work we do.

A new breaker panel with a copper grounding rod
Panel install with grounding
An EV charger installed in a home garage
EV charger installation
Installing a GFCI outlet in a kitchen backsplash
GFCI outlet install

Residential electrical repair and installation for Fresno and Clovis homes

Pro Fix repairs and installs electrical systems in homes across Fresno, Clovis, and the wider Central Valley. Whether a breaker keeps tripping or you want new wiring for a remodel, one call brings a licensed and insured electrician to your door.

We work on the parts of a house you use every day. That means outlets, switches, ceiling fixtures, fans, panels, and dedicated circuits for big appliances. If something sparks, buzzes, or goes dark, we find the cause and fix it right.

Because we run electrical alongside HVAC, plumbing, remodeling, and home security, we can handle a job that crosses trades without you juggling three contractors. One team stays accountable from start to finish, day or night.

Breakers & panels

Your electrical panel is the heart of your home's power, and Pro Fix upgrades, repairs, and replaces it. We handle panel upgrades, breaker replacement, subpanels, and old fuse box replacement for Fresno and Clovis homes.

Many older Central Valley houses still run on 100-amp service. If you are adding central air, a hot tub, or an EV charger, that may not be enough. We perform a load calculation, then recommend the right service size, often a 200-amp upgrade, so your home has room to grow.

A breaker that trips again and again is telling you something. Sometimes it is an overloaded circuit, sometimes a failing breaker, sometimes a wiring fault. We troubleshoot the real problem instead of just resetting the switch. Every upgrade is code-compliant and permitted where required.

Outlets

When an outlet goes dead, Pro Fix finds out why and gets it working again. We repair dead outlets, install GFCI outlets, add new outlets, and upgrade tired ones throughout your house.

A dead outlet is not always a big problem, but it is worth checking. It can be a tripped GFCI, a loose wire, or a worn receptacle. We test the circuit, trace the fault, and repair it safely.

Kitchens, bathrooms, garages, and outdoor areas need GFCI protection to guard against shock. If your home is missing them, or you want more outlets where extension cords now run, we add code-compliant outlets on the right circuit for the load.

Light fixtures

Pro Fix installs and replaces ceiling lights, recessed lighting, fixtures, dimmers, and fans in homes across Fresno and Clovis. If you bought a new light fixture or ceiling fan, we mount it safely and wire it right.

Swapping a fixture sounds simple, but old boxes, hidden wiring, and heavy fans can turn it into a real electrical job. A ceiling fan needs a box rated to hold its weight and motion. We make sure yours is.

We also handle recessed lighting layouts, LED lighting retrofits, and dimmer switches that let you set the mood in any room. If lights flicker, buzz, or die early, we track down the wiring or connection behind it.

Rewiring

Pro Fix rewires homes that have outgrown or outlived their old wiring. That includes whole-house rewiring plus removing knob-and-tube wiring and aluminum wiring found in many older Central Valley houses.

Knob-and-tube and aluminum wiring were common decades ago, but both can be a fire and safety risk today. If your home has either, or you cannot add modern circuits without blowing a fuse, rewiring may be the safe answer.

We plan the work to keep your household running, room by room where possible. Every new circuit is code-compliant, tied into a properly sized panel, and inspected. When we finish, your home is ready for today's loads, from air conditioning to EV charging.

EV charger install & repair

Pro Fix installs and repairs Level 2 EV chargers at Fresno and Clovis homes. A Level 2 charger runs on a 240V dedicated circuit, the same kind of power an electric dryer or range uses, and it charges far faster than a standard wall outlet.

Before we install, we check your panel capacity. Adding a charger draws real amperage, so we run a load calculation to confirm your service can carry it. If your panel is full or undersized, we talk through a subpanel or a panel upgrade first.

We mount the charger, run the dedicated circuit, and test it end to end. If a charger you already own has stopped working, we troubleshoot the circuit, the breaker, and the connection to get you charging again.

Permits, inspections and code-compliant work

Pro Fix pulls the permits and handles the inspections your electrical work requires. We are licensed and insured, and we do the job to code so your home stays safe and your paperwork stays clean.

Permits protect you. They put a city inspector's eyes on the work, which matters when you sell your home or file an insurance claim. Panel upgrades, rewiring, new circuits, and EV chargers usually need one.

We handle the permit process for the jobs that call for it and schedule the inspection. You get electrical work that meets code, not a shortcut that fails later.

Residential electrical questions

Homeowners ask us the same electrical questions again and again, so here are honest answers. If yours is not covered, call and ask.

Every home is different. The best way to get a firm answer for yours is a look at your panel, your wiring, and how you use power. We give you that assessment and a free quote before any work starts.

You can reach Pro Fix any hour, any day. For a safety concern like burning smells, sparks, or a hot panel, call (559) 470-7000 right away. We offer 24/7 emergency service across Fresno, Clovis, and the Central Valley.

Frequently Asked Questions

How do I know if I need an electrical panel upgrade?
A few signs point to an upgrade. If your breakers trip often, your lights dim when big appliances start, you still have a fuse box, or you are adding central air or an EV charger, your panel may be maxed out. We run a load calculation on your home and tell you honestly whether a 200-amp service or subpanel makes sense.
Why is my outlet not working when the breaker isn't tripped?
Often a tripped GFCI outlet is the cause. GFCI outlets protect several receptacles at once, so one tripped GFCI in a bathroom or garage can kill outlets in other rooms. Press its reset button first. If that does not work, you may have a loose wire, a worn outlet, or a wiring fault, and we can trace and fix it.
Do I need an electrician to install a ceiling light fixture?
For a simple swap you sometimes can, but a licensed electrician is the safe choice. Old wiring, an ungrounded box, or a heavy fixture can turn a quick job risky. If you are adding a fixture where none existed, or hanging a ceiling fan, the box and circuit must be right. We handle both safely and to code.
How long does whole-house rewiring take?
It depends on the size of your home, how many circuits you need, and how easy the walls are to reach. A rewire is a bigger project than a single repair, and we plan it room by room to keep your household running. After we see your home, we give you a clear timeline and a free quote before we start.
Do I need to upgrade my panel to install an EV charger?
Not always. A Level 2 EV charger needs a 240V dedicated circuit and a fair amount of amperage, so it comes down to your panel's capacity. If your panel has room and enough service, we simply add the circuit. If it is full or undersized, we may recommend a subpanel or a panel upgrade first. We run a load calculation to be sure.
What size electrical panel does my home need?
There is no single answer, because it depends on your home's electrical load. A small home with gas appliances may do fine on 100-amp service, while a larger all-electric home with central air and an EV charger often needs 200-amp. We add up your real loads with a load calculation, then size the panel to fit your home today and tomorrow.
Do you pull permits for residential electrical work?
Yes. For work that requires one, Pro Fix pulls the permit and schedules the inspection. Panel upgrades, rewiring, new circuits, and EV charger installs usually need a permit. It puts a city inspector on the job and protects you when you sell or file a claim. We are licensed and insured, and we do the work to code.
Why do my lights flicker or dim?
Flickering or dimming lights usually mean a loose connection, an overloaded circuit, or a panel that cannot keep up. If the whole house dims when the AC or a big appliance kicks on, your service may be undersized. A single flickering fixture is often a loose wire or bad switch. We troubleshoot the cause and fix it, day or night.

Need it handled today?

One call reaches a licensed Pro Fix team, day or night, across Fresno, Clovis, and the Central Valley.

Call 24/7 Free Quote